Toronto · GTA
Crown moulding, light coves and coffered ceilings in Toronto
Toronto homes range from narrow semis to big detached houses and downtown condos. The right moulding depends on which one you have.
Homes in Toronto
Older neighbourhoods such as Leaside, The Beaches and Riverdale have brick semis and detached houses with traditional rooms. Etobicoke, North York and Scarborough have many bungalows and split-level homes. Downtown, most people live in condos and townhouses.
What suits them
Crown moulding
Traditional rooms often have ceilings around 8 ft, and a 5 to 6 inch profile usually suits them. Keep the moulding in proportion with the baseboard and door trim, so the room feels balanced.
Light coves
Condos often have a flat ceiling and one overhead light. A light cove gives soft, indirect light instead of one harsh overhead fixture. We handle the electrical work for lighting as part of an installation.
Coffered ceilings
A coffered ceiling can add character to a bigger living room or dining room in a detached house. Smaller rooms usually look better with crown moulding alone.
Sizes larger than 8 inches, for 10 ft ceilings and higher, are available as custom sizes through Everest Mouldings. Contact us.
Crown mouldings · LED light coves · Coffered ceilings · Ceiling mouldings overview
Condo board approval
In a condo, ask your property manager about renovation rules before you start. Many buildings also ask you to book the elevator for deliveries. It is easier to sort this out first.
Working from our Mississauga shop
Our shop is in Mississauga, and we serve the GTA, Toronto included. Send us your address, ceiling height and a few photos, and we will tell you what we suggest.
Our address is 3226 Wharton Way, Mississauga, Ontario L4X 2C1.
Questions about Toronto
Do I need my condo board’s approval?
Often, yes. Check your building’s rules or ask your property manager before any work starts.
Do you install in Toronto?
Yes. We install across the GTA, including Toronto houses and condos. A condo may need your building’s approval first.
Can a light cove go in a condo?
Often it can, but it depends on your ceiling and your building’s rules. Send us your room details and we will help you check.
Crown mouldings
Eight profiles. Ask us for a quote, or buy online at NuCrown.

Two Step Cove Crown Mouldings
Sizes: 4 to 8 in

One Step Cove Crown Mouldings
Sizes: 4 to 8 in

Symmetrical Crown Mouldings
Sizes: 4 to 8 in

Tuscany Crown Mouldings
Sizes: 5 to 8 in

Milan Crown Mouldings
Sizes: 5 to 8 in

Georgian Crown Mouldings
Sizes: 4 to 8 in

Deco Crown Mouldings
Sizes: 5 to 8 in

Cove Crown Mouldings
Sizes: 5 to 8 in
- See all →All crown mouldings
LED light coves
Eight profiles, each with a cross-section drawing. Ask us for a quote, or buy online.

LED Cove Lighting LC-01
Profile: 7.62 × 4.25 in (approx.)

LED Cove Lighting LC-02
Profile: 3.10 × 3.83 in (approx.)

LED Cove Lighting LC-03
Profile: 2.38 × 4.64 in (approx.)

LED Cove Lighting LC-04
Profile: 3.10 × 3.83 in (approx.)

LED Cove Lighting LC-05
Profile: 3.10 × 3.83 in (approx.)

LED Cove Lighting LC-06
Profile: 3.10 × 3.83 in (approx.)

LED Cove Lighting LC-07
Profile: 4.51 × 3.00 in (approx.)

LED Cove Lighting LC-08
Profile: 1.30 × 2.50 in (approx.)
- See all →All LED light coves
Coffered ceilings and beams
Not sold online. Ask for a quote for your room.

IB-02 beam profile
Drawing: 9 7/8 × 5 3/4 in

IB-03 beam profile
Drawing: 7 × 1 3/4 in

IB-04 beam profile
Drawing: 6 × 2 13/16 in

IB-07 beam profile
Drawing: 7 3/4 × 5 1/8 in

IB-09 beam profile
Drawing: 9 15/16 × 5 15/16 in

IB-10 beam profile
Drawing: 10 1/2 × 5 3/4 in

IB-11 beam profile
Drawing: 8 × 9 in

IB-15 beam profile
Drawing: 8 × 3 in
- See all →All beam profiles
Ready to start?
Send your room details, or try the free online estimator.
